integrate mbedtls testing and remove mbedtls fetch

1 files changed, 320 insertions, 0 deletions

diff --git a/vendor/openssl/trace.h b/vendor/openssl/trace.h
new file mode 100644
index 0000000..9a5b56e
--- /dev/null
+++ b/vendor/openssl/trace.h
@@ -0,0 +1,320 @@
+/*
+ * Copyright 2019-2023 The OpenSSL Project Authors. All Rights Reserved.
+ *
+ * Licensed under the Apache License 2.0 (the "License").  You may not use
+ * this file except in compliance with the License.  You can obtain a copy
+ * in the file LICENSE in the source distribution or at
+ * https://www.openssl.org/source/license.html
+ */
+
+#ifndef OPENSSL_TRACE_H
+# define OPENSSL_TRACE_H
+# pragma once
+
+# include <stdarg.h>
+
+# include <openssl/bio.h>
+
+# ifdef  __cplusplus
+extern "C" {
+# endif
+
+/*
+ * TRACE CATEGORIES
+ */
+
+/*
+ * The trace messages of the OpenSSL libraries are organized into different
+ * categories. For every trace category, the application can register a separate
+ * tracer callback. When a callback is registered, a so called trace channel is
+ * created for this category. This channel consists essentially of an internal
+ * BIO which sends all trace output it receives to the registered application
+ * callback.
+ *
+ * The ALL category can be used as a fallback category to register a single
+ * channel which receives the output from all categories. However, if the
+ * application intends to print the trace channel name in the line prefix,
+ * it is better to register channels for all categories separately.
+ * (This is how the openssl application does it.)
+ */
+# define OSSL_TRACE_CATEGORY_ALL                 0 /* The fallback */
+# define OSSL_TRACE_CATEGORY_TRACE               1
+# define OSSL_TRACE_CATEGORY_INIT                2
+# define OSSL_TRACE_CATEGORY_TLS                 3
+# define OSSL_TRACE_CATEGORY_TLS_CIPHER          4
+# define OSSL_TRACE_CATEGORY_CONF                5
+# define OSSL_TRACE_CATEGORY_ENGINE_TABLE        6
+# define OSSL_TRACE_CATEGORY_ENGINE_REF_COUNT    7
+# define OSSL_TRACE_CATEGORY_PKCS5V2             8
+# define OSSL_TRACE_CATEGORY_PKCS12_KEYGEN       9
+# define OSSL_TRACE_CATEGORY_PKCS12_DECRYPT     10
+# define OSSL_TRACE_CATEGORY_X509V3_POLICY      11
+# define OSSL_TRACE_CATEGORY_BN_CTX             12
+# define OSSL_TRACE_CATEGORY_CMP                13
+# define OSSL_TRACE_CATEGORY_STORE              14
+# define OSSL_TRACE_CATEGORY_DECODER            15
+# define OSSL_TRACE_CATEGORY_ENCODER            16
+# define OSSL_TRACE_CATEGORY_REF_COUNT          17
+# define OSSL_TRACE_CATEGORY_HTTP               18
+/* Count of available categories. */
+# define OSSL_TRACE_CATEGORY_NUM                19
+/* KEEP THIS LIST IN SYNC with trace_categories[] in crypto/trace.c */
+
+/* Returns the trace category number for the given |name| */
+int OSSL_trace_get_category_num(const char *name);
+
+/* Returns the trace category name for the given |num| */
+const char *OSSL_trace_get_category_name(int num);
+
+/*
+ * TRACE CONSUMERS
+ */
+
+/*
+ * Enables tracing for the given |category| by providing a BIO sink
+ * as |channel|. If a null pointer is passed as |channel|, an existing
+ * trace channel is removed and tracing for the category is disabled.
+ *
+ * Returns 1 on success and 0 on failure
+ */
+int OSSL_trace_set_channel(int category, BIO* channel);
+
+/*
+ * Attach a prefix and a suffix to the given |category|, to be printed at the
+ * beginning and at the end of each trace output group, i.e. when
+ * OSSL_trace_begin() and OSSL_trace_end() are called.
+ * If a null pointer is passed as argument, the existing prefix or suffix is
+ * removed.
+ *
+ * They return 1 on success and 0 on failure
+ */
+int OSSL_trace_set_prefix(int category, const char *prefix);
+int OSSL_trace_set_suffix(int category, const char *suffix);
+
+/*
+ * OSSL_trace_cb is the type tracing callback provided by the application.
+ * It MUST return the number of bytes written, or 0 on error (in other words,
+ * it can never write zero bytes).
+ *
+ * The |buffer| will always contain text, which may consist of several lines.
+ * The |data| argument points to whatever data was provided by the application
+ * when registering the tracer function.
+ *
+ * The |category| number is given, as well as a |cmd| number, described below.
+ */
+typedef size_t (*OSSL_trace_cb)(const char *buffer, size_t count,
+                                int category, int cmd, void *data);
+/*
+ * Possible |cmd| numbers.
+ */
+# define OSSL_TRACE_CTRL_BEGIN  0
+# define OSSL_TRACE_CTRL_WRITE  1
+# define OSSL_TRACE_CTRL_END    2
+
+/*
+ * Enables tracing for the given |category| by creating an internal
+ * trace channel which sends the output to the given |callback|.
+ * If a null pointer is passed as callback, an existing trace channel
+ * is removed and tracing for the category is disabled.
+ *
+ * NOTE: OSSL_trace_set_channel() and OSSL_trace_set_callback() are mutually
+ *       exclusive.
+ *
+ * Returns 1 on success and 0 on failure
+ */
+int OSSL_trace_set_callback(int category, OSSL_trace_cb callback, void *data);
+
+/*
+ * TRACE PRODUCERS
+ */
+
+/*
+ * Returns 1 if tracing for the specified category is enabled, otherwise 0
+ */
+int OSSL_trace_enabled(int category);
+
+/*
+ * Wrap a group of tracing output calls.  OSSL_trace_begin() locks tracing and
+ * returns the trace channel associated with the given category, or NULL if no
+ * channel is associated with the category.  OSSL_trace_end() unlocks tracing.
+ *
+ * Usage:
+ *
+ *    BIO *out;
+ *    if ((out = OSSL_trace_begin(category)) != NULL) {
+ *        ...
+ *        BIO_fprintf(out, ...);
+ *        ...
+ *        OSSL_trace_end(category, out);
+ *    }
+ *
+ * See also the convenience macros OSSL_TRACE_BEGIN and OSSL_TRACE_END below.
+ */
+BIO *OSSL_trace_begin(int category);
+void OSSL_trace_end(int category, BIO *channel);
+
+/*
+ * OSSL_TRACE* Convenience Macros
+ */
+
+/*
+ * When the tracing feature is disabled, these macros are defined to
+ * produce dead code, which a good compiler should eliminate.
+ */
+
+/*
+ * OSSL_TRACE_BEGIN, OSSL_TRACE_END - Define a Trace Group
+ *
+ * These two macros can be used to create a block which is executed only
+ * if the corresponding trace category is enabled. Inside this block, a
+ * local variable named |trc_out| is defined, which points to the channel
+ * associated with the given trace category.
+ *
+ * Usage: (using 'TLS' as an example category)
+ *
+ *     OSSL_TRACE_BEGIN(TLS) {
+ *
+ *         BIO_fprintf(trc_out, ... );
+ *
+ *     } OSSL_TRACE_END(TLS);
+ *
+ *
+ * This expands to the following code
+ *
+ *     do {
+ *         BIO *trc_out = OSSL_trace_begin(OSSL_TRACE_CATEGORY_TLS);
+ *         if (trc_out != NULL) {
+ *             ...
+ *             BIO_fprintf(trc_out, ...);
+ *         }
+ *         OSSL_trace_end(OSSL_TRACE_CATEGORY_TLS, trc_out);
+ *     } while (0);
+ *
+ * The use of the inner '{...}' group and the trailing ';' is enforced
+ * by the definition of the macros in order to make the code look as much
+ * like C code as possible.
+ *
+ * Before returning from inside the trace block, it is necessary to
+ * call OSSL_TRACE_CANCEL(category).
+ */
+
+# if !defined OPENSSL_NO_TRACE && !defined FIPS_MODULE
+
+#  define OSSL_TRACE_BEGIN(category) \
+    do { \
+        BIO *trc_out = OSSL_trace_begin(OSSL_TRACE_CATEGORY_##category); \
+ \
+        if (trc_out != NULL)
+
+#  define OSSL_TRACE_END(category) \
+        OSSL_trace_end(OSSL_TRACE_CATEGORY_##category, trc_out); \
+    } while (0)
+
+#  define OSSL_TRACE_CANCEL(category) \
+        OSSL_trace_end(OSSL_TRACE_CATEGORY_##category, trc_out) \
+
+# else
+
+#  define OSSL_TRACE_BEGIN(category)           \
+    do {                                        \
+        BIO *trc_out = NULL;                    \
+        if (0)
+
+#  define OSSL_TRACE_END(category)             \
+    } while(0)
+
+#  define OSSL_TRACE_CANCEL(category)          \
+    ((void)0)
+
+# endif
+
+/*
+ * OSSL_TRACE_ENABLED() - Check whether tracing is enabled for |category|
+ *
+ * Usage:
+ *
+ *     if (OSSL_TRACE_ENABLED(TLS)) {
+ *         ...
+ *     }
+ */
+# if !defined OPENSSL_NO_TRACE && !defined FIPS_MODULE
+
+#  define OSSL_TRACE_ENABLED(category) \
+    OSSL_trace_enabled(OSSL_TRACE_CATEGORY_##category)
+
+# else
+
+#  define OSSL_TRACE_ENABLED(category) (0)
+
+# endif
+
+/*
+ * OSSL_TRACE*() - OneShot Trace Macros
+ *
+ * These macros are intended to produce a simple printf-style trace output.
+ * Unfortunately, C90 macros don't support variable arguments, so the
+ * "vararg" OSSL_TRACEV() macro has a rather weird usage pattern:
+ *
+ *    OSSL_TRACEV(category, (trc_out, "format string", ...args...));
+ *
+ * Where 'channel' is the literal symbol of this name, not a variable.
+ * For that reason, it is currently not intended to be used directly,
+ * but only as helper macro for the other oneshot trace macros
+ * OSSL_TRACE(), OSSL_TRACE1(), OSSL_TRACE2(), ...
+ *
+ * Usage:
+ *
+ *    OSSL_TRACE(INIT, "Hello world!\n");
+ *    OSSL_TRACE1(TLS, "The answer is %d\n", 42);
+ *    OSSL_TRACE2(TLS, "The ultimate question to answer %d is '%s'\n",
+ *                42, "What do you get when you multiply six by nine?");
+ */
+
+# if !defined OPENSSL_NO_TRACE && !defined FIPS_MODULE
+
+#  define OSSL_TRACEV(category, args) \
+    OSSL_TRACE_BEGIN(category) \
+        BIO_printf args; \
+    OSSL_TRACE_END(category)
+
+# else
+
+#  define OSSL_TRACEV(category, args) ((void)0)
+
+# endif
+
+# define OSSL_TRACE(category, text) \
+    OSSL_TRACEV(category, (trc_out, "%s", text))
+
+# define OSSL_TRACE1(category, format, arg1) \
+    OSSL_TRACEV(category, (trc_out, format, arg1))
+# define OSSL_TRACE2(category, format, arg1, arg2) \
+    OSSL_TRACEV(category, (trc_out, format, arg1, arg2))
+# define OSSL_TRACE3(category, format, arg1, arg2, arg3) \
+    OSSL_TRACEV(category, (trc_out, format, arg1, arg2, arg3))
+# define OSSL_TRACE4(category, format, arg1, arg2, arg3, arg4) \
+    OSSL_TRACEV(category, (trc_out, format, arg1, arg2, arg3, arg4))
+# define OSSL_TRACE5(category, format, arg1, arg2, arg3, arg4, arg5) \
+    OSSL_TRACEV(category, (trc_out, format, arg1, arg2, arg3, arg4, arg5))
+# define OSSL_TRACE6(category, format, arg1, arg2, arg3, arg4, arg5, arg6) \
+    OSSL_TRACEV(category, (trc_out, format, arg1, arg2, arg3, arg4, arg5, arg6))
+# define OSSL_TRACE7(category, format, arg1, arg2, arg3, arg4, arg5, arg6, arg7) \
+    OSSL_TRACEV(category, (trc_out, format, arg1, arg2, arg3, arg4, arg5, arg6, arg7))
+# define OSSL_TRACE8(category, format, arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8) \
+    OSSL_TRACEV(category, (trc_out, format, arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8))
+# define OSSL_TRACE9(category, format, arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9) \
+    OSSL_TRACEV(category, (trc_out, format, arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9))
+
+#define OSSL_TRACE_STRING_MAX 80
+int OSSL_trace_string(BIO *out, int text, int full,
+                      const unsigned char *data, size_t size);
+#define OSSL_TRACE_STRING(category, text, full, data, len) \
+    OSSL_TRACE_BEGIN(category) { \
+        OSSL_trace_string(trc_out, text, full, data, len);  \
+    } OSSL_TRACE_END(category)
+
+# ifdef  __cplusplus
+}
+# endif
+
+#endif