diff options
Diffstat (limited to 'include/mbedtls/cmac.h')
| -rw-r--r-- | include/mbedtls/cmac.h | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/include/mbedtls/cmac.h b/include/mbedtls/cmac.h new file mode 100644 index 0000000..97b86fc --- /dev/null +++ b/include/mbedtls/cmac.h @@ -0,0 +1,246 @@ +/** + * \file cmac.h + * + * \brief This file contains CMAC definitions and functions. + * + * The Cipher-based Message Authentication Code (CMAC) Mode for + * Authentication is defined in <em>RFC-4493: The AES-CMAC Algorithm</em>. + * It is supported with AES and DES. + */ +/* + * Copyright The Mbed TLS Contributors + * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later + */ + +#ifndef MBEDTLS_CMAC_H +#define MBEDTLS_CMAC_H +#include "mbedtls/private_access.h" + +#include "mbedtls/build_info.h" + +#include "mbedtls/cipher.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define MBEDTLS_AES_BLOCK_SIZE 16 +#define MBEDTLS_DES3_BLOCK_SIZE 8 + +/* We don't support Camellia or ARIA in this module */ +#if defined(MBEDTLS_AES_C) +#define MBEDTLS_CMAC_MAX_BLOCK_SIZE 16 /**< The longest block used by CMAC is that of AES. */ +#else +#define MBEDTLS_CMAC_MAX_BLOCK_SIZE 8 /**< The longest block used by CMAC is that of 3DES. */ +#endif + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +/** The longest block supported by the cipher module. + * + * \deprecated + * For the maximum block size of a cipher supported by the CMAC module, + * use #MBEDTLS_CMAC_MAX_BLOCK_SIZE. + * For the maximum block size of a cipher supported by the cipher module, + * use #MBEDTLS_MAX_BLOCK_LENGTH. + */ +/* Before Mbed TLS 3.5, this was the maximum block size supported by the CMAC + * module, so it didn't take Camellia or ARIA into account. Since the name + * of the macro doesn't even convey "CMAC", this was misleading. Now the size + * is sufficient for any cipher, but the name is defined in cmac.h for + * backward compatibility. */ +#define MBEDTLS_CIPHER_BLKSIZE_MAX MBEDTLS_MAX_BLOCK_LENGTH +#endif /* MBEDTLS_DEPRECATED_REMOVED */ + +#if !defined(MBEDTLS_CMAC_ALT) + +/** + * The CMAC context structure. + */ +struct mbedtls_cmac_context_t { + /** The internal state of the CMAC algorithm. */ + unsigned char MBEDTLS_PRIVATE(state)[MBEDTLS_CMAC_MAX_BLOCK_SIZE]; + + /** Unprocessed data - either data that was not block aligned and is still + * pending processing, or the final block. */ + unsigned char MBEDTLS_PRIVATE(unprocessed_block)[MBEDTLS_CMAC_MAX_BLOCK_SIZE]; + + /** The length of data pending processing. */ + size_t MBEDTLS_PRIVATE(unprocessed_len); +}; + +#else /* !MBEDTLS_CMAC_ALT */ +#include "cmac_alt.h" +#endif /* !MBEDTLS_CMAC_ALT */ + +/** + * \brief This function starts a new CMAC computation + * by setting the CMAC key, and preparing to authenticate + * the input data. + * It must be called with an initialized cipher context. + * + * Once this function has completed, data can be supplied + * to the CMAC computation by calling + * mbedtls_cipher_cmac_update(). + * + * To start a CMAC computation using the same key as a previous + * CMAC computation, use mbedtls_cipher_cmac_finish(). + * + * \note When the CMAC implementation is supplied by an alternate + * implementation (through #MBEDTLS_CMAC_ALT), some ciphers + * may not be supported by that implementation, and thus + * return an error. Alternate implementations must support + * AES-128 and AES-256, and may support AES-192 and 3DES. + * + * \param ctx The cipher context used for the CMAC operation, initialized + * as one of the following types: MBEDTLS_CIPHER_AES_128_ECB, + * MBEDTLS_CIPHER_AES_192_ECB, MBEDTLS_CIPHER_AES_256_ECB, + * or MBEDTLS_CIPHER_DES_EDE3_ECB. + * \param key The CMAC key. + * \param keybits The length of the CMAC key in bits. + * Must be supported by the cipher. + * + * \return \c 0 on success. + * \return A cipher-specific error code on failure. + */ +int mbedtls_cipher_cmac_starts(mbedtls_cipher_context_t *ctx, + const unsigned char *key, size_t keybits); + +/** + * \brief This function feeds an input buffer into an ongoing CMAC + * computation. + * + * The CMAC computation must have previously been started + * by calling mbedtls_cipher_cmac_starts() or + * mbedtls_cipher_cmac_reset(). + * + * Call this function as many times as needed to input the + * data to be authenticated. + * Once all of the required data has been input, + * call mbedtls_cipher_cmac_finish() to obtain the result + * of the CMAC operation. + * + * \param ctx The cipher context used for the CMAC operation. + * \param input The buffer holding the input data. + * \param ilen The length of the input data. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA + * if parameter verification fails. + */ +int mbedtls_cipher_cmac_update(mbedtls_cipher_context_t *ctx, + const unsigned char *input, size_t ilen); + +/** + * \brief This function finishes an ongoing CMAC operation, and + * writes the result to the output buffer. + * + * It should be followed either by + * mbedtls_cipher_cmac_reset(), which starts another CMAC + * operation with the same key, or mbedtls_cipher_free(), + * which clears the cipher context. + * + * \param ctx The cipher context used for the CMAC operation. + * \param output The output buffer for the CMAC checksum result. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA + * if parameter verification fails. + */ +int mbedtls_cipher_cmac_finish(mbedtls_cipher_context_t *ctx, + unsigned char *output); + +/** + * \brief This function starts a new CMAC operation with the same + * key as the previous one. + * + * It should be called after finishing the previous CMAC + * operation with mbedtls_cipher_cmac_finish(). + * After calling this function, + * call mbedtls_cipher_cmac_update() to supply the new + * CMAC operation with data. + * + * \param ctx The cipher context used for the CMAC operation. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA + * if parameter verification fails. + */ +int mbedtls_cipher_cmac_reset(mbedtls_cipher_context_t *ctx); + +/** + * \brief This function calculates the full generic CMAC + * on the input buffer with the provided key. + * + * The function allocates the context, performs the + * calculation, and frees the context. + * + * The CMAC result is calculated as + * output = generic CMAC(cmac key, input buffer). + * + * \note When the CMAC implementation is supplied by an alternate + * implementation (through #MBEDTLS_CMAC_ALT), some ciphers + * may not be supported by that implementation, and thus + * return an error. Alternate implementations must support + * AES-128 and AES-256, and may support AES-192 and 3DES. + * + * \param cipher_info The cipher information. + * \param key The CMAC key. + * \param keylen The length of the CMAC key in bits. + * \param input The buffer holding the input data. + * \param ilen The length of the input data. + * \param output The buffer for the generic CMAC result. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA + * if parameter verification fails. + */ +int mbedtls_cipher_cmac(const mbedtls_cipher_info_t *cipher_info, + const unsigned char *key, size_t keylen, + const unsigned char *input, size_t ilen, + unsigned char *output); + +#if defined(MBEDTLS_AES_C) +/** + * \brief This function implements the AES-CMAC-PRF-128 pseudorandom + * function, as defined in + * <em>RFC-4615: The Advanced Encryption Standard-Cipher-based + * Message Authentication Code-Pseudo-Random Function-128 + * (AES-CMAC-PRF-128) Algorithm for the Internet Key + * Exchange Protocol (IKE).</em> + * + * \param key The key to use. + * \param key_len The key length in Bytes. + * \param input The buffer holding the input data. + * \param in_len The length of the input data in Bytes. + * \param output The buffer holding the generated 16 Bytes of + * pseudorandom output. + * + * \return \c 0 on success. + */ +int mbedtls_aes_cmac_prf_128(const unsigned char *key, size_t key_len, + const unsigned char *input, size_t in_len, + unsigned char output[16]); +#endif /* MBEDTLS_AES_C */ + +#if defined(MBEDTLS_SELF_TEST) && (defined(MBEDTLS_AES_C) || defined(MBEDTLS_DES_C)) +/** + * \brief The CMAC checkup routine. + * + * \note In case the CMAC routines are provided by an alternative + * implementation (i.e. #MBEDTLS_CMAC_ALT is defined), the + * checkup routine will succeed even if the implementation does + * not support the less widely used AES-192 or 3DES primitives. + * The self-test requires at least AES-128 and AES-256 to be + * supported by the underlying implementation. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_cmac_self_test(int verbose); +#endif /* MBEDTLS_SELF_TEST && ( MBEDTLS_AES_C || MBEDTLS_DES_C ) */ + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_CMAC_H */ |